Keystone Group —
lighthouse of the world trade

Energy

Paraffin C14-C17
Parameter Standard
Boiling point, min-max°C 235-315
Flash point, °C 129
Autoignition temperature, °C 228
Density 20°C, g/cm3 0.768-0.770
Alkanes, fraction C13 and higher, not more than 1.0
Alkanes, fraction C18 and higher, not more than 1.0
Mass fraction of aromatic compounds, not more than % 0.01
Mass fraction of water-soluble acids and alkalis 0.00
Appearance viscous liquid,
transparent , colourless -light yellow
Send the product request
Paraffin C10-C13
Parameter Standard
Mass fraction, C10-C13, not less than, % 98.0
Boiling point, min-max°C 150-253
Flash point, °C 84
Autoignition temperature, °C 228
Density 20°C, g/cm3 0.740-0.760
Alkanes, fraction C9 and lower, not more than 1.0
Alkanes, fraction C14 and higher, not more than 1.0
Mass fraction of aromatic compounds, not more than % 0.5
Appearance viscous
transparent liquid
Send the product request
Diesel 10ppm
Parameter Test method Norms acc. to Technical Regulations Norms acc. to GOST R 52368-2005
amended №1
Actual Value
Cetane number, min GOST R 52709 51 51,0 52,0
Cetane Index, min ASTM D 4737 - 46,0 50,0
Density @ 15 °С, kg/m3 GOST R 51069 - 820-845 835,5
Polycyclic aromatic hydrocarbons, % (by weight),
max
GOST R EN 12916 11 8 0,7
Sulphur, mass, mg/kg, max
Sulphur, mass, mg/kg, max, type III
GOST R 52660 10
-
-
10
8,1
8,1
Flash point at closed cup, deg. C,
min
Flash point at closed cup, deg. C, more than
GOST R EN
ISO 2719
40
-
-
55
63
63
Conradson Carbon Residue (on 10 pct residue), %
(by weight), max
EN ISO 10370 - 0,3 0,01
Ash, % (by weight), max EN ISO 6245 - 0,01 0,002
Water
content, mg/kg, max
EN ISO 12937 - 200 14
Total
impurities, mg/kg, max
EN 12662 - 24 6
Copper strip test (3 hours at 50°C), on-scale
units
EN ISO 2160 - Class 1 Class 1
Oxidation
stability: total residues, g/cub. m., max
GOST R EN
ISO 12205
- 25 15
Lubricating
property: normalized WSD at 60°С, µm , max
GOST R ISO 12156-1 460 460 388
Kinematic
viscosity at 40° C, mm sq/sec
GOST 33 - 2,00-4,50 2,72
Fractional breakdown:
at temperature 250°С,% (by volume), lessthan
at temperature 350°С,% (by volume), min
95% (by volume) distilled at t °С,max
GOST R EN
ISO 3405

-
-
360

65
85
360

34,5
97,5
342
Cold filter plugging point, °С, max GOST 22254 - minus 5 minus 8
 


Additional parameters:

- Density @ 20 °С, kg/m3: 832

- Conductivity @ 20 °С, Cm/m: 252

- Cloud point, °С: minus 5

- Sulphur content (by weight), %: 0,00081

Additives content:

1. Wear-resistant additive PC-32 - up to 0,02% by weight

2. Anti-static additive Kerostat 8168 – up to 0,0002% by weight

3. Pour-point depressant Keroflux 6100 – up to 0,05% by weight

4. Dispersing additive Keroflux 3614 – up to 0,05% by weight/ No metal-containing additives.

Fuel is produced with Diesel fuel hydrotreating process

Send the product request
Base oil

Base oil HVI-2
TU 38.401-58-416-2014

Parameter Test method Norms acc. to Normative document Norms acc. to Technical Regulations Actual Value
Kinematic viscosity, mm2/sec , max
at 100°C
at 50°C
at 40°C
at -30°C
ASTM D 445 2,6
9
12
1200
-
-
-
-
2,5
7
9
1200
Viscosity Index, min GOST 25371 100 - 107
Flash point at closed cup, °C, min ISO 2719 135 - 167
Flash point at opened cup, °C, min ASTM D 92 Not regulated 135 170
Pour point at closed cup, °C, GOST 20287
(method A)
-45 - -45
Acid Index, mg KOH/1 g oils, max ASTM D 974 0,01 - 0,003
Colour on colorimeter CNT, CNT unit, max ASTM D 1500 1 - 0,5
Sulphur mass content, % max ASTM D 4294 Not regulated - 0,000
Water content, % GOST 2477 none - none
Mechanical impurities mass content, % max GOST 6370 none 0,03 none
Density at 15°C, kg/m3, max GOST P 51069 895 - 822
Carbon content in aromatic rings, % max GOST 28640 3,0 - 3,0
Tangent of dielectric losses at 90°C, %, max ASTM D 924 0,5 - 0,0
Solvents mass content, % max GOST P 52532 - 0,3 none

 

Base oil VHVI-4
TU 38.401-58-415-2014

Parameter Test method Norms acc. to Normative document Norms acc. to Technical Regulations Actual Value
Kinematic viscosity, mm2/sec at 100°C ASTM D 445 3,9 – 4,6 - 4,3
Viscosity Index, min GOST 25371 125 - 129
Flash point at closed cup, °C, min ASTM D 92 210 135 218
Pour point at closed cup, °C, min ASTM D 97 -15 - -17
Colour on colorimeter CNT, CNT unit, max GOST 20284 1 - 0,000
Sulphur mass content, % max GOST P 51947 0,03 - 0,000
Water content, % GOST 2477 none - none
Mechanical impurities mass content, % max GOST 6370 none 0,03 none
Density at 15°C, kg/m3, max GOST P 51069 Not regulated - 828
Outward appearance visual Homogeneous clear fluid without color or light yellow color - Homogeneous clear fluid without color
Solvents mass content, % max GOST P 52532 - 0,03 none
Send the product request